NEWS

Why should the four-column hydraulic press be heat treated during the production process?

Why should the four-column hydraulic press be heat treated during the production process?

The body of the four-column hydraulic press will be more stable and not easily deformed after heat treatment. Since the four-column hydraulic press is in the forging machine, it is easy to cause deformation of the fuselage without reciprocating movement. After the heat treatment, the blade properties of the fuselage can be improved. Extend the service life of the machine tool. It can also create more value for you. Therefore, the quality of the same machine tool will be upgraded through heat treatment.

01

2023

/

02

Introduction to the difference between hydraulic press and hydraulic press

Introduction to the difference between hydraulic press and hydraulic press

Many customers have questions about the concept of hydraulic press and hydraulic press. Are the two words the same product? What is the difference between the two? Some customers buy hydraulic press and see hydraulic press. Many customers are more entangled with these two words. The products corresponding to the words will be explained in detail by Wenzhou Oukai Machinery Co., Ltd. today:

01

2023

/

02

How to properly clean hydraulic press components?

How to properly clean hydraulic press components?

Hydraulic press is a machine that uses static pressure to process metal, plastic, rubber, wood, powder and other products. Commonly used in casting, stamping, cold extrusion, straightening, bending, flanging, deep drawing, powder metallurgy, stamping and other stamping processes and forming processes. Whether it is assembling or disassembling the hydraulic components of the hydraulic press, pollution must be avoided. Therefore, the hydraulic press must be cleaned before installation and use, so that it can be cleaned correctly and effectively. Here we have summarized several cleaning methods for hydraulic presses.

01

2023

/

02

Why does the hydraulic press fail to operate?

Why does the hydraulic press fail to operate?

Now that the hydraulic machine fails, it may cause the entire valve core to be stuck. For example, if the original valve port is blocked, this situation occurs. When the valve hole of the flow valve or the directional valve is blocked, the entire hydraulic press can easily exhibit these operations. The phenomenon of failure. Under this condition, the condition of the oil contamination of the hydraulic press should also be checked. Check the dirt inside, or some other gelatinous substance deposits, and see if they have stuck the entire valve. Hole, the same should also check the wear condition of the entire hydraulic valve.

01

2023

/

02

What should I pay attention to when buying a hydraulic press?

What should I pay attention to when buying a hydraulic press?

To buy a hydraulic press, it is recommended to find some friends in the same industry to ask their opinions, or to find out first on the Internet. Relatively speaking, those companies that are too small in scale, lack production equipment, and do not last for a long time, try not to choose them. The technical strength of the manufacturers is very important, because this directly affects the quality of the products.

01

2023

/

02

Single-column hydraulic press improves product accuracy

Single-column hydraulic press improves product accuracy

The single-column hydraulic press is a C-type single-arm structure and is welded by steel plates. After welding, it undergoes tempering and aging treatment to ensure that the machine never deforms. The hydraulic system is located in the fuselage with beautiful appearance and easy operation. It is mainly suitable for the stretching, forming and limitation of metal products, as well as the processing of non-metallic materials, the limitation of powder metallurgy products, the correction of shaft parts, the limitation of sleeve parts, and the forming and trimming of metal products.

01

2023

/

02

What are the anti-disturbance methods of the four-column hydraulic press?

What are the anti-disturbance methods of the four-column hydraulic press?

The development of the four-column hydraulic press industry is indeed very good nowadays. Naturally, there are many disputes about the four-column hydraulic press. Of course, most people may be worried about the anti-disturbance method of the four-column hydraulic press. Today, Wenzhou Oukai Machinery Co., Ltd. is here to solve your doubts.

01

2023

/

02

Forging hydraulic press Wenzhou Oukai Machinery Co., Ltd. provides you

Forging hydraulic press Wenzhou Oukai Machinery Co., Ltd. provides you

Wenzhou Oukai Machinery Co., Ltd. specializes in the production and sales of hydraulic equipment such as multi-directional forging hydraulic presses, rapid forging hydraulic presses, three-station red punch hydraulic presses, automatic precision red punch hydraulic presses, etc. It can also design and manufacture special purpose and Specifications of hydraulic equipment

01

2023

/

02

< 1 2 >

oudaun

Our products are widely used in oil pipelines, nuclear power plant valves, high-pressure valves, water heating valves, pressure vessels, construction industry, automobile industry and other fields.

Zhejiang ouduan heavy industry machinery Co.Ltd

ADD: No.1 Shangxu Road, Nanmingshan Street, Liandu District, Lishui City, Zhejiang Province

M.T:0086-13736707088

TEL:0086-577-63175265

FAX:0086-577-63175268
E-MAIL：okcan01@163.com

Copyright © Zhejiang ouduan heavy industry machinery Co.Ltd

| Business license

Business license

Powered www.300.cn | SEO

OUDUAN