Y65-500T three-station red punch hydraulic press

1) The forming is basically not restricted by the external shape of the product part itself;

2) The production uses common equipment, which is easy to put into production and is suitable for small and medium-sized enterprises;

3) High productivity, suitable for mass production;

4) Due to the use of core pulling device, the inside of the pressed part is hollow, unlike the part processed by the forging die, the inside is solid, and the thickness of the burr of the general small red die is about 0.5mm, while the forging mold The burr thickness of the part is generally above 2mm, so the material utilization rate is much higher than that of the forging die;

5) Red punching is a machining process with little and no cutting. The surface roughness is close to that of the mold, and the dimensional accuracy can reach 6-7, so its mechanical cutting volume is very small;

6) The mechanical properties of the red stamping parts are good. After the red stamping, the metal blanks are heated, extruded, and cooled, and their metal structure changes, eliminating the original defects caused by casting or drawing, making the internal crystal structure of the parts The linear shape from the inside to the outside improves the mechanical properties of the red-punched parts;

7) After red punching, the internal grains of the metal have been refined, the density of the metal has been enhanced, and the corrosion resistance of the parts has been improved;

8) Suitable for all kinds of colored or black metal processing.